UPS en línea industrial

Model 10KVA 15KVA 20KVA 30KVA 40KVA Capacity 8KW 12KW 16KW 24KW 32KW Input Rated voltage 380/400/415 Vac three-phase Voltage range ±20% Frequency range 50/60HZ±5% Power factor ≥0.8 Current harmonic distortion <5%with harmonic filter Soft Start 0-100% in 10" Bypass Input Rated voltage 220/230/240 Vac single-phase Permitted voltage range ±15%(selectable from ±10% to±25% from front panel) Rated frequency 50/60Hz Permitted frequency range ±2%(selectable from ±1% to 5% from front panel) Standard features BackFeed portection;split bypass line Batteries Type Maintenance-free lead-acid VRLA AGM/GEL;NICd Maximum recharge current(A) 0.2 X C10 DC Voltage 384VDC AC ripple voltage <1% Inverter output Number of phases 1 Rated voltage(V) 230Vac single-phase Regulation of the output voltage 220~244Vac phase/neutral(from control panel) Crest factor(Ipeak/Irms) 3:1 Static stability ±1% Dynamic stability ±5% Frequency 50/60Hz configurable Overload 110% 125% 150% of the rated current for 5h/10'/1' Frequency stability ±0.05% on mains failure System Remote signaling Volt free contacts Remote controls EPO and Bypass Communication RS232+romote contacts Operation temperature 0℃/+40℃ Relative humidity <95% non condensing Colour Light grey (RAL7035) Noise 54dBA at 1m 60dBA at 1m 65dBA at 1m Protection degree IP42 Efficiency Smart Mode up to 98% Compliance Safty: EN 62040-1-1(Directive 2006/95/EC);EMC:6200-2(Directive 2004/108/EC) Weight(KG)N.W 200 220 230 260   Application: Petroleum, chemical industry, gas and power station and so on. Key features: Adopt full digital control technology Intelligent detection and monitoring function Digitally control the static switch with zero switch Full isolation between input and output Super low output zero earth voltage DC UPS isolated with utility power completely Cubical design with power standard (customization) Multifunctional protection for over-voltage, under voltage, over current, short circuit and over temperature and so on. Large-screen LCD monitor with Chinese and English operation interface Ultra-long 256 event record, user-friendly analysis and management to the situation of the power supply (touch screen display) Static bypass has a strong anti-overload capability  

Model 60KVA 80KVA Capacity 48KW 64KW Input Rated voltage 380/400/415 Vac three-phase Voltage range ±20% Frequency range 50/60HZ±5% Power factor ≥0.8 Current harmonic distortion <5%with harmonic filter Soft Start 0-100% in 10" Bypass Input Rated voltage 380/400/415 Vac single-phase Permitted voltage range ±15%(selectable from ±10% to±25% from front panel) Rated frequency 50/60Hz Permitted frequency range ±2%(selectable from ±1% to 5% from front panel) Standard features BackFeed portection;split bypass line Batteries Type Maintenance-free lead-acid VRLA AGM/GEL;NICd Maximum recharge current(A) 0.2 X C10 DC Voltage 384VDC AC ripple voltage <1% Inverter output Number of phases 3+N Rated voltage(V) 380/400/415Vac Regulation of the output voltage 348~424Vac phase/neutral(from control panel) Crest factor(Ipeak/Irms) 3:1 Static stability ±1% Dynamic stability ±5% Frequency 50/60Hz configurable Overload 110% 125% 150% of the rated current for 5h/10'/1' Frequency stability ±0.05% on mains failure;±2%(selectable from ±1% to ±5%)with mains supply present System Remote signaling Volt free contacts Remote controls EPO and Bypass Communication RS232+romote contacts Operation temperature 0℃/+40℃ Relative humidity <95% non condensing Colour Light grey (RAL7035) Noise 50-80dBA at 1m Protection degree IP42 Efficiency Smart Mode up to 98% Compliance Safty: EN 62040-1-1(Directive 2006/95/EC);EMC:6200-2(Directive 2004/108/EC) Weight(KG)N.W 440 520   Application: Petroleum, chemical industry, gas and power station and so on. Key features: Adopt full digital control technology Intelligent detection and monitoring function Digitally control the static switch with zero switch Full isolation between input and output Super low output zero earth voltage DC UPS isolated with utility power completely Cubical design with power standard (customization) Multifunctional protection for over-voltage, under voltage, over current, short circuit and over temperature and so on. Large-screen LCD monitor with Chinese and English operation interface Ultra-long 256 event record, user-friendly analysis and management to the situation of the power supply (touch screen display) Static bypass has a strong anti-overload capability  

Modelo 100 kVA 120kVA 160 kVA Capacidad 80kW 96 kW 128 kW Entrada Tensión nominal 380/400/415 Vac trifásico Rango de voltaje ± 201 TP 1 T Rango de frecuencia 50/60 Hz ± 51 TP 1 T Factor de potencia ≥0.8 Distorsión armónica actual < 5%, con filtro armónico Inicio suave 10 pulgadas 0-100% Entrada de derivación Tensión nominal 380/400/415 Vac monofásico Rango de voltaje permitido ± 151 TP 1 T (disponible en el panel frontal ± 101 TP 1 T a ± 251 TP 1) Frecuencia nominal 50/60 Hz Rango de frecuencia permitido ± 21 TP 1 T (el panel frontal puede elegir ± 11 TP 1 T a 51 TP 1) Características estándar Derivación de retroalimentación Ruta de derivación Batería Tipo Ácido de plomo libre de mantenimiento VRLA AGM/gel Corriente de carga máxima (A) 0.2X C10 Voltaje de CC 384VDC 480VDC Voltaje de ondulación de CA < 1% Salida del inversor Número de fase 3 + N Tensión nominal (V) 380/400/415VAC Regulación de voltaje de salida 348 ~ 424VAC fase/punto neutro (desde el panel de control) Coeficiente de cresta (IPEAK/IRMS) 3: 1 Estabilidad estática ± 11 TP 1 T Estabilidad dinámica ± 51 TP 1 T Frecuencia 50/60 Hz configurable Sobrecarga Corriente nominal de 5h/10'/1' 11050% Estabilidad de frecuencia Falla de energía ± 0.051tptpt; La fuente de alimentación está presente ± 2% (disponible de ± 1% a ± 5%) Sistema Señalización remota Sin contacto Control remoto EPO y bypass Comunicación Contactos RS232 + Romote Temperatura de funcionamiento 0 ℃/+ 40 ℃ Humedad relativa < 95% no se condensa Color Gris claro (RAL7035) Ruido 1M 50-65dBA Grado de protección IP42 Modo inteligente de eficiencia Hasta 98% Cumplimiento Seguridad: EN 62040-1 (Directiva 2006/95/CE), EMC: 6200-2 (Directiva 2004/108/CE) Peso (kg) 770 855 1300 Aplicación: Petróleo, productos químicos, gas, plantas de energía, etc. Características principales: Usando tecnología de control digital completa Función inteligente de detección y monitoreo Interruptor estático de control digital de interruptor cero Entrada y salida completamente aisladas Voltaje cero de salida ultrabaja UPS de CC completamente aislados de la fuente de alimentación común Diseño de cubo con estándar de potencia (personalizado) Sobretensión, bajo voltaje, sobrecorriente, cortocircuito, sobretemperatura y otra protección multifuncional. Pantalla LCD de pantalla grande con interfaz de usuario en chino e inglés Registros de eventos largos de 256, análisis y administración de la fuente de alimentación fácil de usar (pantalla táctil) Capacidad de sobrecarga de derivación estática