UPS en ligne industriel

Model 10KVA 15KVA 20KVA 30KVA 40KVA Capacity 8KW 12KW 16KW 24KW 32KW Input Rated voltage 380/400/415 Vac three-phase Voltage range ±20% Frequency range 50/60HZ±5% Power factor ≥0.8 Current harmonic distortion <5%with harmonic filter Soft Start 0-100% in 10" Bypass Input Rated voltage 220/230/240 Vac single-phase Permitted voltage range ±15%(selectable from ±10% to±25% from front panel) Rated frequency 50/60Hz Permitted frequency range ±2%(selectable from ±1% to 5% from front panel) Standard features BackFeed portection;split bypass line Batteries Type Maintenance-free lead-acid VRLA AGM/GEL;NICd Maximum recharge current(A) 0.2 X C10 DC Voltage 384VDC AC ripple voltage <1% Inverter output Number of phases 1 Rated voltage(V) 230Vac single-phase Regulation of the output voltage 220~244Vac phase/neutral(from control panel) Crest factor(Ipeak/Irms) 3:1 Static stability ±1% Dynamic stability ±5% Frequency 50/60Hz configurable Overload 110% 125% 150% of the rated current for 5h/10'/1' Frequency stability ±0.05% on mains failure System Remote signaling Volt free contacts Remote controls EPO and Bypass Communication RS232+romote contacts Operation temperature 0℃/+40℃ Relative humidity <95% non condensing Colour Light grey (RAL7035) Noise 54dBA at 1m 60dBA at 1m 65dBA at 1m Protection degree IP42 Efficiency Smart Mode up to 98% Compliance Safty: EN 62040-1-1(Directive 2006/95/EC);EMC:6200-2(Directive 2004/108/EC) Weight(KG)N.W 200 220 230 260   Application: Petroleum, chemical industry, gas and power station and so on. Key features: Adopt full digital control technology Intelligent detection and monitoring function Digitally control the static switch with zero switch Full isolation between input and output Super low output zero earth voltage DC UPS isolated with utility power completely Cubical design with power standard (customization) Multifunctional protection for over-voltage, under voltage, over current, short circuit and over temperature and so on. Large-screen LCD monitor with Chinese and English operation interface Ultra-long 256 event record, user-friendly analysis and management to the situation of the power supply (touch screen display) Static bypass has a strong anti-overload capability  

Model 60KVA 80KVA Capacity 48KW 64KW Input Rated voltage 380/400/415 Vac three-phase Voltage range ±20% Frequency range 50/60HZ±5% Power factor ≥0.8 Current harmonic distortion <5%with harmonic filter Soft Start 0-100% in 10" Bypass Input Rated voltage 380/400/415 Vac single-phase Permitted voltage range ±15%(selectable from ±10% to±25% from front panel) Rated frequency 50/60Hz Permitted frequency range ±2%(selectable from ±1% to 5% from front panel) Standard features BackFeed portection;split bypass line Batteries Type Maintenance-free lead-acid VRLA AGM/GEL;NICd Maximum recharge current(A) 0.2 X C10 DC Voltage 384VDC AC ripple voltage <1% Inverter output Number of phases 3+N Rated voltage(V) 380/400/415Vac Regulation of the output voltage 348~424Vac phase/neutral(from control panel) Crest factor(Ipeak/Irms) 3:1 Static stability ±1% Dynamic stability ±5% Frequency 50/60Hz configurable Overload 110% 125% 150% of the rated current for 5h/10'/1' Frequency stability ±0.05% on mains failure;±2%(selectable from ±1% to ±5%)with mains supply present System Remote signaling Volt free contacts Remote controls EPO and Bypass Communication RS232+romote contacts Operation temperature 0℃/+40℃ Relative humidity <95% non condensing Colour Light grey (RAL7035) Noise 50-80dBA at 1m Protection degree IP42 Efficiency Smart Mode up to 98% Compliance Safty: EN 62040-1-1(Directive 2006/95/EC);EMC:6200-2(Directive 2004/108/EC) Weight(KG)N.W 440 520   Application: Petroleum, chemical industry, gas and power station and so on. Key features: Adopt full digital control technology Intelligent detection and monitoring function Digitally control the static switch with zero switch Full isolation between input and output Super low output zero earth voltage DC UPS isolated with utility power completely Cubical design with power standard (customization) Multifunctional protection for over-voltage, under voltage, over current, short circuit and over temperature and so on. Large-screen LCD monitor with Chinese and English operation interface Ultra-long 256 event record, user-friendly analysis and management to the situation of the power supply (touch screen display) Static bypass has a strong anti-overload capability  

Modèle 100 kVA 120 kVA 160 kVA Capacité 80kW 96kW 128 kW Input Tension nominale 380/400/415 Vac triphasé Plage de tension ± 201 TP 1 T Gamme de fréquences 50/60 Hz ± 51 TP 1 T Facteur de puissance ≥ 0,8 Distorsion harmonique actuelle < 5%, avec filtre harmonique Démarrage progressif 10 pouces 0-100% Entrée de dérivation Tension nominale 380/400/415 Vac monophasé Plage de tension admissible ± 151 TP 1 T (possibilité de choisir entre ± 101 TP 1 T et ± 251 TP 1 T pour le panneau avant) Fréquence nominale 50/60 Hz Gamme de fréquences autorisée ± 21 TP 1 T (± 11 TP 1 T à 51 TP 1 T au choix pour le panneau avant) Caractéristiques standard Shunt de rétroaction; Route de dérivation Batteries Type VRLA Acide au plomb sans entretien AGM/Gel Courant de charge maximal (A) 0,2 X C10 Tension continue 384VDC 480VDC Tension d'ondulation AC < 1% Sortie de l'onduleur Nombre de phases 3+N Tension nominale (V) 380/400/415VAC Réglage de la tension de sortie 348 ~ 424VAC phase/neutre (à partir du panneau de commande) Coefficient de crête (IPEAK/IRMS) 3: 1 Stabilité statique ± 11 TP 1 T Stabilité dynamique ± 51 TP 1 T Fréquence 50/60 Hz configurable Surcharge Courant nominal11050% Stabilité de fréquence ± 0,051 tp1t en cas de panne de courant; ±2% lorsque l'alimentation est présente (peut être sélectionné de ±1% à ±5%) Système Signalisation à distance Contacts sans volts Télécommande L'OEB et le bypass Transmissions RS232 + contact Romote Température de fonctionnement 0 ºC/+ 40 ºC Humidité relative < 95% ne se condense pas Couleur Gris clair (RAL7035) Bruit 50-65 dBA à 1M Degré de protection IP42 Mode intelligent d'efficacité Jusqu'à 98% Conformité Sécurité: EN 62040-1-1 (directive 2006/95/CE); CEM: 6200-2 (directive 2004/108/CE) Poids (kg) 770 855 1300 Application: Pétrole, produits chimiques, gaz, centrales électriques, etc. Principales caractéristiques: Adoptez une technologie de contrôle entièrement numérique Fonction de détection et de surveillance intelligente Commutateur statique à commande numérique avec commutateur zéro Les entrées et sorties sont complètement isolées Sortie ultra-basse tension de masse nulle UPS DC complètement isolé de l'alimentation publique Conception cubique avec puissance standard (sur mesure) Protection multifonctionnelle contre les surtensions, les sous-tensions, les surintensités, les courts-circuits, les surchauffes, etc. Écran LCD grand écran avec interface de fonctionnement en chinois et en anglais Enregistrement ultra long 256 événements pour faciliter l'analyse et la gestion de la situation d'alimentation par l'utilisateur (écran tactile) Forte résistance à la surcharge du bypass statique