Modular Online UPS

Main Features 1.1 Summarization Our UPS is a kind of three-in- three -out high frequency online UPS, it provides three specifications: The 200~600kVA. The products are modularized and adopt the N+X redundancy. It can flexibly increase the number of the UPS modules according to the load capacity which is convenient for flexible allocation and gradually investment. The UPS can solve most of the power supply problems, such as blackout, over-voltage, under-voltage, voltage sudden drop, oscillating of decreasing extent, high voltage pulse, voltage fluctuation, surge, inrush current, harmonic distortion (THD), noise interference, frequency fluctuation, etc.. This UPS can be applied to different applications from computer device, automatic equipment, communication system to industry equipment 1.2 Functions and Features ◆Digital control ◆19-inch standard cabinet 2-meter high cabinets are provided according to the user’s requirement. ◆Modularized design ◆High power-density design The height of the single module is 3U. ◆N+X parallel redundancy This series UPS adopts N+X parallel redundancy design, user can set different redundancy according to the importance of the load. While the redundancy modules are set more than two, the availability of UPS system will achieve 99.999%, which may satisfy the required reliability of the critical load connected. Through LCD display setting, you may configure the required quantity of the redundancy unit. When the load connected is over the number of the redundancy, the UPS will alert right away. The design of the MTBF (Meantime before Failure) is up to 250,000 hours. This series can set the number of redundancy modules. When the load exceeds the redundancy setting, the UPS can still work normally and simultaneously send out corresponding warning as long as the load doesn’t exceed the total capacity of modules. ◆Parallel redundant control system ◆Optimizing distributed convergence for the cabinet ◆Centralized bypass ◆Common Battery  ◆Automatic charge current adjustment according to battery capacity connected. ◆3-Stage Intelligent charging ◆Touch-screen Super-large LCD display ◆Remote monitoring via SNMP ◆Optional Accessories available such as Isolation transformer, distribution Panel, SNMP Card, Relay Contact Board, etc... ◆Equip with Maintenance Bypass Switch for easy maintenance purpose. ◆Superior MTTR (Meantime to repair) & Short shutdown time in maintenance ◆Centralized monitoring module is also available ◆EPO and REPO function 1.3 Model description  This document describes the following UPS models: ◆ 200kVA The models provide 4 configurations: 50 kVA, 100 kVA, 150 kVA and 200 kVA ◆ 300kVA The models provide 6 configurations: 50 kVA, 100 kVA, 150 kVA, 200 kVA, 250 kVA and 300 kVA. ◆ 400kVA The models provide 8 configurations: 50 kVA, 100 kVA, 150 kVA, 200 kVA, 250 kVA, 300 kVA, 350 kVA and 400 kVA. ◆ 500kVA The models provide 10 configurations: 50 kVA, 100 kVA, 150 kVA, 200 kVA, 250 kVA, 300 kVA, 350 kVA, 400 kVA, 450 kVA and 400 kVA. ◆ 600kVA The models provide 12 configurations: 50 kVA, 100 kVA, 150 kVA, 200 kVA, 250 kVA, 300 kVA, 350 kVA, 400 kVA, 450 kVA, 500 kVA, 550 kVA and 400 kVA. ◆ 200kVA supports cable routing from the top and can support cable routing ◆ 300kVA supports cable routing from the top and can support cable routing from the bottom if a cable entry cabinet is configured. ◆ 400kVA standard cabinet supports cable routing from the top. ◆ 400kVA full configuration cabinet supports cable routing from the bottom and top. ◆ 500kVA supports cable routing from the bottom and top. ◆ 600kVA supports cable routing from the bottom and top.   *  Standard configuration : cabinet only with maintenance bypass switch *  Full configuration : cabinet with mains, bypass, maintenance and output switch   The appearance of the product      200/300/400kVA(Standard and Full configuration) Front View                              Side View                                    Rear View 200kVA(Standard and Full configuration) 300kVA(Standard and Full configuration)  400kVA (Standard configuration) 400/500/600kVA (Standard and Full configuration) 400kVA (Full configuration)     500kVA(Standard and Full configuration)       600kVA (Standard and Full configuration) (1) LCD panel : Display UPS data and status (2) power cabinet : Assembly power module (3) Power distribution cabinet : Assembly control unit, bypass module and switch (4) Power module (5) Control unit (6) Mains switch (7) Output switch (8) Maintenance switch (9) Bypass switch (10) Bypass module (11) Mains-A input copper bar (12) Mains-B input copper bar (13) Mains-C input copper bar (14) Input neutral copper bar (15) Battery negative copper bar (16) Battery neutral copper bar (17) Battery positive copper bar (18) Output-A input copper bar (19) Output-B input copper bar (20) Output-C input copper bar (21) Output neutral copper bar (22) Bypass-A input copper bar : Wiring must be used when mains-bypass separation (23) Bypass-B input copper bar : Wiring must be used when mains-bypass separation (24) Bypass-C input copper bar : Wiring must be used when mains-bypass separation (25)  Phase A mains-bypass common input connect copper bar (26)  Phase B mains-bypass common input connect copper bar (27)  Phase C mains-bypass common input connect copper bar Control unit (1) ECU1/2 : Centralized control unit (2) Dry-contact unit (3) monitor unit (4) Intelligent slot ECU unit (1) EPO port (2) SWITCH STATUS (3) the other port (4) BP_FEEDBACK : PIN1_NC, PIN2_NO,PIN4_common (5) Optional dry contacts Monitor unit (1) Input dry contacts (2) LCD port (3) CAN port : BMS port and remote LCD port (4) COM : battery monitor port (5) BAT_T : battery temperature detect port (6) PE (7) RS-485 UPS module appearance Front View Side View (1) Module fixed screw (2) LED (3) Module switch (4) Fan   Model 300kVA 400kVA 500kVA 600kVA Cabinet capacity (VA/W) 50k~300k/50k~300k 50k~400k/50k~400k 50k~500k/50k~500k 50k~600k/50k~600k Module capacity (VA/W) 50k/50k Max. module number 6 8 10 12 Input Phase 3 Phase 4 Wires and Ground Rated Voltage 380/400/415Vac Voltage Range 38~485Vac ◆ At 40°C: The UPS works at ful l load when the voltage is 323–485Vac and   is derated load when the voltage is 323–138Vac ◆ At 30°C: The UPS works at ful l load when the voltage is 305–485Vac and   is derated load when the voltage is 305–138Vac Frequency Range 40Hz-70Hz Power Factor ≥0.99 Current THDi ≤3%(100% nonlinear load) Bypass Voltage Range Max.voltage: 220V:+25 %(   optional +10%, +15%, +20%); 230V:+20 %( optional   +10%, +15%); 240V:+15 %( optional +10%); Min. voltage:-45 %(   optional -10%, -20%,-30%) Frequency protection range: ±10% Output Phase 3 Phase 4 Wires and Ground Rated Voltage 380/400/415Vac Power Factor 1 Voltage Regulation ±1% Frequency Range Utility Mode ±1%/±2%/±4%/±5%/±10%of   the rated frequency(optional) Battery Mode (50/60±0.1)Hz Crest factor 3:1 THD ≤2% with l inear load ≤4% with non l inear load Overload Optional Voltage: ±180V/192V/±204V/±216V/±228V/±240/±252/±264/±276/±288/±300Vdc (30/32/34/36/38/40/42/44/46/48/50pcs optional) 384Vdc~480Vdc (30~40 pcs, 40 pcs define, 36 and 50 pcs no power derating; 32~34 pcs   output power factor Battery Voltage Optional Voltage: ±180V/192V/±204V/±216V/±228V/±240/±252/±264/±276/±288/±300Vdc (30/32/34/36/38/40/42/44/46/48/50pcs optional) 384Vdc~480Vdc (30~40 pcs, 40 pcs define, 36 and 50 pcs no power derating; 32~34 pcs   output power factor Module charge current (A)   max. 20A Transfer Time Utility   to Battery : 0ms; Utility to bypass: 0ms Protection Short Circuit Hold Whole System Overheat Line Mode: Switch to   Bypass; Backup Mode: Shut down UPS immediately Battery Low Alarm and Switch off Self-diagnostics Upon Power On and Software Control EPO Shut down UPS immediately Battery Advanced Battery Management Noise Suppression Complies with EN62040-2 Communication Interface CAN,   RS485, FE, LBS, Parallel, Relay card, SNMP card(optional) Environment Operating Temperature 0℃～40℃ Storage Temperature -25℃～55℃ Humidity 0～95% non condensing Altitude < 1500m Display Audible & Visual Line Failure, Battery   Low, Overload, System Fault Status LED UPS Fault, Alarm and normal Reading On the LCD Input Voltage, Input   Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage, parameter set, history record… Other Standard   cabinet Dimensions (W*D*H) 600*850*2000 600*850*2000 1200*850*2000 Full   cabinet Dimensions(W*D*H)(mm) 1200*850*2000 Module Dimensions(W*D*H)(mm) 440*620*130 Cabinet Weight (Kg) 260 280/600 650 720 Module Weight (Kg) 34 Safety Conformance CE,EN/IEC 62040-3,EN/IEC